6 boulevard de Strasbourg
77600 BUSSY ST GEORGES
Tel.: 01.64.76.44.00 - Fax : 01.64.76.44.01
Les Halles - Jardin Nelson Mandela
Surfatek : 461B 461F 461G 461H 461I
Architectes urbanistes SEURA
Centre Commercial Bay2
Paris Georges V
Architecte : Carbondale - Paris
S URFATEK F/F - Trowellable
SURFATEK is a trowellable mortar consisting of high performance natural decorative aggregates, selected for their complementary design and size and high performance binder with compensated shrinkage, wear resistant, resistant to chemical attacks of grease and hydrocarbons, animal manure and standard cleaning products...
S URFAMARBRE- Trowellable
The trowellable mortar SURFAMARBRE consists of a synthetic resin, marble crushed aggregates and a high-performance binder with balanced contraction.
Three composants: Resin, marble aggregates, hights-performance binder...
I SOXYL - Trowellable
is a mix of synthetic resin, a cement binder high performance and special aggregates, hard and carrefully calibrated.
Apply ISOXYL on rough, clean, dust-free and free of oil and grease surface - thickness 8 to 15 mm
After a planing, dusting and rehydrating of the surface, apply an adhesion primar SURFACOLLE on the existing concrete.
Apply the levelled mortar ISOXYL 8 to 15 mm on the sticky SURFACOLLE, then float and smooth until obtaining a closed surface...
S URFAPOX TR - Trowellable
SURFAPOX is a trowellable mortar with free-solvent epoxy resin and a high durability special loading, thickness 5 to 10 mm.
To a prepared, sound, dry, dust-free, free of grease and hydrocarbon substrate (shotblasting recommanded), apply an adhesion primer with roller, SURFAPRIM TR at a rate of 200 to 300 gr/m² depending on the condition of substrate.
On a still sticky primer, apply the three mixed components drawn with ruler on rails of required thickness, then float until obtaining the right closed surface...
S URFAZO - Trowellable mortar
Trowellable mortar composed of non-crystallisable epoxy resin, various decorative crushed aggregates and binder.
Apply SURFAZO on various substrates without demolition.
After a mechanical preparation and suitable primary, apply on tiled floors, stone or concrete...
The information contained in this leaflet is provided for guidance based on our lnowledge. It does not constitute a waiver of our terms and conditions of sale an shall in no event imply any waranty by us or render us liable with regard to the use of our products.
For each project, a study should be jointly conducted with us.