• Les durcisseurs français

    PRODUCTS FOR

    6 boulevard de Strasbourg
    77600 BUSSY ST GEORGES
    Tel.: 01.64.76.44.00 - Fax : 01.64.76.44.01

    Nos locaux

    Nos locaux

    Nos locaux


Surfapox PAL

P
aint

Documentations of the product at the following format:

 

P
lease fill the form or get in contact with us if you need information on our product.

From our email address: commercial@durcisseurs-francais.fr


D
escription

Le SURFAPOX PAL is an free-solvent, coloured, enhanced fine silica epoxy resin.

           
          Two components:
           
         
  • Coloured resin + silica filler
  •      
  • Hardener

Le SURFAPOX PAL is a thick, high quality epoxy paint, a genuine mini self-levelling (thickness 500 µ to 1 mm).

 

M
ode of application

Apply a layer of primary adhesion SURFAPRIM AL, 200 to 300 gr/m² depending on the porosity of the surface, on a concrete properly prepared, dry, clean, free of grease, oil and other hydrocarbon. Mix both components with alow speed stirrer to avoid air.
2 layers are recommanded

 

C
haracteristics

       
       
  • Density: 1.020
  •    
  • Flash point: 84°C
  •    
  • AFNOR Classification: Standard T 36005 - Category I – class 6B
  •    
  • No dust emission
  •    
  • Wear resistant
  •    
  • Chemicals resistant
  •    
  • Easy to clean
 

P
ackaging

     
  • Kits 10 or 15 kg (A + B)
  •        
          Storage: 6 months in the original packaging between 10 and 25°C
 

C
olouring

     
  • With the choice following the colour chart RAL
 

F
inishing

Le SURFAPOX PAL is naturally smooth and glossy, the aspect can be modified with the following addenda:

           
          Anti skid:
           
         
  • By quartz spray or corundim of various grades
  •      
  • By applying a layer of resin SURFAPOX THIXO with "orange peel" aspect
           
          Decorative:
           
         
  • Mottled :
          Spraying of fine flakes or quartzcolour on the surface, then a colorless coating, on fresh resin:
           
         
  • Smooth: SURFAPOX FL resin
  •      
  • "Orange peel": SURFAPOX THIXO resin
           
         
  • Flakes:
          On fresh resin, spray medium-sized coloured flakes more or less thick. After drying, suck from non-sticky flakes then apply on or more layers of colourless coating.
           
         
  • Smooth: SURFAPOX FL resin
  •      
  • "Orange peel": SURFAPOX THIXO resin
          Fluctuations and density of powdering, choice of colours offer a large range of aspects allowing a customized floor.
 

H
ealth and safety

       
       
  • Keep packaging tightly closed
  •    
  • Store in a well-ventilated place
  •    
  • Take the normal precautions for handling a chemical
  •    
  • Epoxy resin: may have a sensitising effect on the body
  •    
  • Special hardener: dangerous compound (Aliphatic Polyamine)
  •    
  • Wear gloves and goggles during application
  •    
  • Do not eat, drink or smoke during application
  •    
  • Avoid inhalation of fumes
 
 
LIMITATION OF LIABILITY
The information contained in this leaflet is provided for guidance based on our lnowledge. It does not constitute a waiver of our terms and conditions of sale an shall in no event imply any waranty by us or render us liable with regard to the use of our products.
For each project, a study should be jointly conducted with us.