6 boulevard de Strasbourg
77600 BUSSY ST GEORGES
Tel.: 01.64.76.44.00 - Fax : 01.64.76.44.01
Surfapox TR - Trowellable
S URFAPOX is a trowellable mortar with free-solvent epoxy resin and a high durability special loading, thickness 5 to 10 mm.
Documentations of the product at the following format:
lease fill the form or get in contact with us if you need information on our product.
M ode of application
To a prepared, sound, dry, dust-free, free of grease and hydrocarbon substrate (shotblasting recommanded), apply an adhesion primer with roller, SURFAPRIM TR at a rate of 200 to 300 gr/m² depending on the condition of substrate.
On a still sticky primer, apply the three mixed components drawn with ruler on rails of required thickness, then float until obtaining the right closed surface
Several top coats can be applied according to the wished aspect.
Density: resin A + B approx. 1.04
Aspect: rough or smooth, mate or shiny, according to the selected finishing
Use: 10 kg of mortar for a thickness of 5 mm/m² (resin 1.2 kg + charge 8,8 kg)
Adhesion: - 2.11 MPA
Flash point: 84° C
AFNOR classification: Standard T36005 – Category I – Class 6B
Good resistance to chemical products (depending of the top coat)
Good water resistance, easy care
Mandatory top coat
24 hours for pedestrian traffic
72 hours for normal traffic
8 days for high traffic
D omaine of application
Repair of old damaged substrates or design of new floors with high traffic: hall, warehouse, workshorp, parking,...
Kits resin A + B: 3.3 kg
Sacks charge: 20 to 30 Kg
Storage: 6 months in the original packaging at temperatures of 5° to 25°C Stockage
As required per RAL colour chart
Other colours available on request
By applying a layer of SURFAPOX FL with bigger non-skid charges
By applying a resin layer "orange peel" aspect
Chiné: Instead of special charges, use a mixture of coloured quartz with appliance of one or two colorless coating
Lisse : SURFAPOX FL resin
"Orange peel": SURFAPOX THIXO resin
H ealth and safety
Keep packaging tightly closed
Store in a well-ventilated place
Take normal safety precautions to handle a chemical
Epoxy resin: may have a sensitising effect on the body
Special hardener: dangerous compound (Aliphatic Polyamine)
Gloves, goggles during application
Do not eat, drink or smoke during application
Avoid inhalation of fumes
O ther products
LIMITATION OF LIABILITY
The information contained in this leaflet is provided for guidance based on our lnowledge. It does not constitute a waiver of our terms and conditions of sale an shall in no event imply any waranty by us or render us liable with regard to the use of our products. For each project, a study should be jointly conducted with us.
The choice of the thickness of SURFAPOX TR to be applied must take into account the quality of substrate, and the required finish and performance.