After mechanical preparation of the substrate (sanding, bush hammering or shotblasting), apply by roller to the dry, non powdery, dust-free, degreased, uniform strength and slightly porous substrate at a rate of 200 to 300 gr/m² per layer.
Two coats might be required on porous or cracked substrates:
Humidity level: lower to 80 %
Application temperature: from 10° to 30°C
C haracteristics
Adherence: 2.11 MPA
Density A + B: 1.100
AFNOR Classification: Standard T36005 – Category I – Class 6B
Flashpoint: 84°C
P ackaging
15 kg kits (part A + B)
Storage: 6 months in the original packaging between 10 and 25°C
H ealth and safety
Keep packaging tightly closed
Store in a well-ventilated place, temperature > 10°C
Take normal safety precautions to handle a chemical
Epoxy resin: may have a sensitising effect on the body
Special hardener: dangerous compound (Aliphatic Polyamine)
Gloves, goggles during application
Do not eat, drink or smoke during application
Avoid inhalation of fumes
O ther products
LIMITATION OF LIABILITY
The information contained in this leaflet is provided for guidance based on our lnowledge. It does not constitute a waiver of our terms and conditions of sale an shall in no event imply any waranty by us or render us liable with regard to the use of our products.
For each project, a study should be jointly conducted with us.